This inductive proximity switch is a 2-wire NPN probe with normally closed contact from Omron. It operates on 10-30 volts DC and has an exceptionally accurate and repeatable detection distance of 5mm. Compatible with Voron printers and others to support bed leveling.
Features:
Type Square type, unshielded
Switching distance 5 mm ±10%
Adjustment distance 0 to 4 mm
Difference distance 10% max. of the detection distance
Sensor object ferrous metal (sensitivity is reduced for non-ferrous metals.)
Operating voltage range 10 to 30 VDC
Current consumption at 24 VDC: 10 mA max.
Control output (output type): NPN open collector
Control output (switching capacity) 50 mA max. (30 VDC max.)
Control output (residual voltage) 1 V max. (load current 50 mA at 2 m cable length)
Ambient temperature (operation) -25 to 70 ℃
Ambient humidity (in operation) 35 to 95% relative humidity
Temperature influence ±20% max. range at 23 °C in the temperature range from −25 to 70 °C
Insulation resistance between charged parts and housing: 5 MΩ min. (at 500 VDC)
Voltage strength between charged parts and the housing: 500 VAC 50/60 Hz 1 Min
Shock resistance Destruction: 200 m/s2 10 times each in the X, Y and Z directions
Protection class IEC: IP67
Case material: Heat-resistant ABS resin
Sensor surface: Heat-resistant ABS resin
Cable length: 2m
Dimensions: 17 mm x 17 mm x 28 mm
Scope of delivery
1x Omron TL-Q5MC2-NPN
There are no reviews yet.
Please see our Privacy Policy
