Fiberlogy EASY PET-G CF
The PETG+CF filament combines the strength of classic PETG with the addition of 10% carbon fiber, which translates into significantly higher rigidity and resistance to mechanical stress. As a result, prints made from Fiberlogy PETG+CF are more resistant to damage, making this filament an ideal choice for engineering projects, prototypes of machine parts and components that must meet high technical requirements.
Despite its advanced technical
properties, the PETG+CF is easy to print, which means it does not require any special hardware (except for a reinforced nozzle) or complicated settings. The filament does not roll up during the printing process, which guarantees excellent results and dimensional stability even when printing larger and more complex models.
Technical data:
-
Filament diameter: 1.75mm
-
Printing temperature: 230-260 °C
-
Bed temperature: 90 °C
-
Weight: 750g filament
-
Diameter tolerance: +/- 0.02mm
-
Oval tolerance: +/- 0.01 mm
-
Increased rigidity and mechanical Strength
-
High chemical resistance
-
Carbon surface
-
Low shrinkage
-
Easy to print
-
No enclosure of the printing chamber necessary
Due to the strong adhesion, it is not recommended to print directly on the surface of the table or glass as this may cause damage.
We recommend using a separator (Magigoo or adhesive tape).
Product safety information
Manufacturer information:
Fiberlab S.A.
Brzezie 387
Brzezie, Polen, 32-014
office@fiberlab.com
https://fiberlogy.com
There are no reviews yet.
